Router login: how to open 192.168.1.1 or 192.168.0.1

By The SpeedFibre team, updated . 3 min read.

Router login: how to open 192.168.1.1 or 192.168.0.1
In short Your router's admin page sits at its default gateway address, usually 192.168.1.1, 192.168.0.1, 192.168.1.254 or 10.0.0.1. Find it in your device's network details, type it in a browser while connected to that router, and log in with the credentials printed on the router's label.
Contents
  1. Step 1: find your router's address
  2. Common default addresses
  3. Step 2: log in
  4. The page will not open: what to check
  5. What to do once you are in

The admin page of your router is where you change the Wi-Fi name and password, pick a channel, update the firmware or see which devices are connected. Reaching it takes one minute once you know its address.

Step 1: find your router's address

The address is the default gateway of your network. Read it on a device connected to the router:

  • Windows: open Command Prompt, type `ipconfig` and read Default Gateway.
  • macOS: System Settings, Network, your connection, Details, TCP/IP, then Router.
  • iPhone and iPad: Settings, Wi-Fi, the (i) next to your network, then Router.
  • Android: Settings, Wi-Fi, tap your network; the gateway appears in the details or advanced section (menus vary by brand).

Common default addresses

AddressOften used by
192.168.1.1Many provider routers, TP-Link, Linksys
192.168.0.1D-Link, some Netgear and cable routers
192.168.1.254Several provider gateways (AT&T, BT Hub)
10.0.0.1Xfinity gateways and some cable routers
192.168.86.1Google Nest Wifi

Some brands also accept a name instead of an address, for example `routerlogin.net` for Netgear or `tplinkwifi.net` for TP-Link. Always trust the gateway you found in step 1 over any list.

Step 2: log in

  1. Stay connected to the router's Wi-Fi or plug in a cable.
  2. Type the address in the browser's address bar, for example `http://192.168.1.1`, not in a search box.
  3. Enter the username and password printed on the router's label or in its manual. Many providers now also offer an app that does the same job.
  4. If the password is still the factory one, change it for a long, unique password.

The page will not open: what to check

  • You are on another network: mobile data, a guest Wi-Fi or a mesh satellite in a different mode can hide the router.
  • A VPN or proxy is active: turn it off, it sends the request elsewhere.
  • Wrong address: the router may have been changed to another range; check the gateway again.
  • Browser warning: some routers use a self-signed certificate. A warning on your own gateway address is normal; elsewhere, it is not.
  • Forgotten password: a factory reset (hold the reset button for about 10 seconds while powered on) restores the label password but erases all your settings, including the Wi-Fi name and password. Use it last.

What to do once you are in

Then run a speed test to check that everything works as before.

#WiFiDiagnosis#SpeedTest#WiFi

Sources and further reading

Frequently asked questions

What is 192.168.1.1?

It is a private IP address, reserved for local networks, that many routers use for their admin page. It only works from inside your own network and is not a website on the internet.

What is the default router password?

It is printed on a label on the router, often together with the Wi-Fi key, or in the manual. Generic passwords such as admin/admin are rare on recent routers.

Is it safe to change router settings?

Yes, as long as you note what you change. The most useful changes are a strong Wi-Fi password, a firmware update and turning off remote administration.

The SpeedFibre team Guides written and reviewed by a telecom engineer specialised in fibre optics (FTTH), with more than 8 years of hands-on network maintenance and measurement. Editorial policy.

Related guides